# binary-safe run-tests script for HEAD - Thread: https://externals.io/message/38144 - Original archive: https://news-web.php.net/php.internals/38144 - Started by Steph Fox on 2008-06-10T15:32:05+00:00 - Messages: 2 - Reply by email to internals@lists.php.net - More for agents: search with https://externals.io/search.md?q={query} · JSON API at https://externals.io/api · documentation at https://externals.io/llms.txt --- ## #38144 — Steph Fox — 2008-06-10T15:32:05+00:00 URL: https://externals.io/message/38144#38144 Hi all, I've been fiddling a bit too much, so the attached is the full script rather than a patch (think ws, cs etc - you wouldn't be able to read the diffs as-is). As far as I can work out, the results it's giving are accurate. I ran a random selection of the failed .php output scripts directly and obtained the same results. However, there are over 100 extra fails in ext/standard alone, mostly (apparently) due to some whitespace confusion. I haven't time to go through all of them, perhaps someone else would like to take over at this point? There's also a `preg_match()` compilation failure in ext\standard\tests\array\bug34066.phpt that I haven't time to investigate, and 22 scripts saved in ANSI encoding (at least, I _think_ they're all ANSI encoded) can't be read and are considered BORKED. So - please play, fix, consider putting into CVS etc. Thanks, - Steph --- ## #38147 — Marcus Boerger — 2008-06-10T17:40:13+00:00 URL: https://externals.io/message/38144#38147 · In reply to: #38144 Hello Steph, you did not say what you intended to change? marcus Tuesday, June 10, 2008, 5:32:05 PM, you wrote: > #!/usr/bin/php > /* > +----------------------------------------------------------------------+ > | PHP Version 6 | > +----------------------------------------------------------------------+ > | Copyright (c) 1997-2008 The PHP Group | > +----------------------------------------------------------------------+ > | This source file is subject to version 3.01 of the PHP license, | > | that is bundled with this package in the file LICENSE, and is | > | available through the world-wide-web at the following url: | > | http://www.php.net/license/3_01.txt | > | If you did not receive a copy of the PHP license and are unable to | > | obtain it through the world-wide-web, please send a note to | > | license@php.net so we can mail you a copy immediately. | > +----------------------------------------------------------------------+ > | Authors: Ilia Alshanetsky | > | Preston L. Bannister | > | Marcus Boerger | > | Derick Rethans | > | Sander Roobol | > | (based on version by: Stig Bakken ) | > | (based on the PHP 3 test framework by Rasmus Lerdorf) | > +----------------------------------------------------------------------+ > */ > /* $Id: run-tests.php, v 1.349 2008/05/27 19:20:39 felipe Exp $ */ > /* Sanity check to ensure that pcre extension needed by this script is available. > * In the event it is not, print a nice error message indicating that this script will > * not run without it. > */ > if (!extension_loaded("pcre")) { > echo << +-----------------------------------------------------------+ > | ! ERROR ! | > | The test-suite requires that you have pcre extension | > | enabled. To enable this extension either compile your PHP | > | with --with-pcre-regex or if you've compiled pcre as a | > | shared module load it via php.ini. | > +-----------------------------------------------------------+ > NO_PCRE_ERROR; > exit; > } > if (!function_exists("proc_open")) { > echo << +-----------------------------------------------------------+ > | ! ERROR ! | > | The test-suite requires that `proc_open()` is available. | > | Please check if you disabled it in php.ini. | > +-----------------------------------------------------------+ > NO_PROC_OPEN_ERROR; > exit; > } > // store current directory > $CUR_DIR = `getcwd()`; > // change into the PHP source directory. > if (getenv('TEST_PHP_SRCDIR')) { > @chdir(getenv('TEST_PHP_SRCDIR')); > } > // Delete some security related environment variables > putenv('SSH_CLIENT=deleted'); > putenv('SSH_AUTH_SOCK=deleted'); > putenv('SSH_TTY=deleted'); > putenv('SSH_CONNECTION=deleted'); > $cwd = `getcwd()`; > set_time_limit(0); > $valgrind_version = 0; > $valgrind_header = ''; > // delete as much output buffers as possible > while(@ob_end_clean()); > if (ob_get_level()) echo "Not all buffers were deleted.\n"; > error_reporting(E_ALL); > $environment = isset($_ENV) ? $_ENV : array(); > // Don't ever guess at the PHP executable location. > // Require the explicit specification. > // Otherwise we could end up testing the wrong file! > $php = null; > $php_cgi = null; > if (getenv('TEST_PHP_EXECUTABLE')) { > $php = getenv('TEST_PHP_EXECUTABLE'); > if ($php=='auto') { > $php = $cwd.'/sapi/cli/php'; > putenv("TEST_PHP_EXECUTABLE=$php"); > if (!getenv('TEST_PHP_CGI_EXECUTABLE')) { > $php_cgi = $cwd.'/sapi/cgi/php-cgi'; > if (file_exists($php_cgi)) { > putenv("TEST_PHP_CGI_EXECUTABLE=$php_cgi"); > } else { > $php_cgi = null; > } > } > } > $environment['TEST_PHP_EXECUTABLE'] = $php; > } > if (getenv('TEST_PHP_CGI_EXECUTABLE')) { > $php_cgi = getenv('TEST_PHP_CGI_EXECUTABLE'); > if ($php_cgi=='auto') { > $php_cgi = $cwd.'/sapi/cgi/php-cgi'; > putenv("TEST_PHP_CGI_EXECUTABLE=$php_cgi"); > } > $environment['TEST_PHP_CGI_EXECUTABLE'] = $php_cgi; > } > function verify_config() > { > global $php; > if (empty($php) || !file_exists($php)) { > error("environment variable TEST_PHP_EXECUTABLE must be set to specify PHP executable!"); > } > if (function_exists('is_executable') && !@is_executable($php)) { > error("invalid PHP executable specified by TEST_PHP_EXECUTABLE = " . $php); > } > } > if (getenv('TEST_PHP_LOG_FORMAT')) { > $log_format = strtoupper(getenv('TEST_PHP_LOG_FORMAT')); > } else { > $log_format = 'LEOD'; > } > // Check whether a detailed log is wanted. > if (getenv('TEST_PHP_DETAILED')) { > $DETAILED = getenv('TEST_PHP_DETAILED'); > } else { > $DETAILED = 0; > } > // Check whether user test dirs are requested. > if (getenv('TEST_PHP_USER')) { > $user_tests = explode (', ', getenv('TEST_PHP_USER')); > } else { > $user_tests = array(); > } > $exts_to_test = array(); > $ini_overwrites = array( > 'output_handler=', > 'open_basedir=', > 'disable_functions=', > 'output_buffering=Off', > 'error_reporting=16383', > 'display_errors=1', > 'display_startup_errors=1', > 'log_errors=0', > 'html_errors=0', > 'track_errors=1', > 'report_memleaks=1', > 'report_zend_debug=0', > 'docref_root=', > 'docref_ext=.html', > 'error_prepend_string=', > 'error_append_string=', > 'auto_prepend_file=', > 'auto_append_file=', > 'ignore_repeated_errors=0', > 'unicode.runtime_encoding=ISO-8859-1', > 'unicode.script_encoding=UTF-8', > 'unicode.output_encoding=UTF-8', > 'unicode.from_error_mode=U_INVALID_SUBSTITUTE', > ); > function write_information($show_html) > { > global $cwd, $php, $php_cgi, $php_info, $user_tests, > $ini_overwrites, $pass_options, $exts_to_test, $leak_check, $valgrind_header; > // Get info from php > $info_file = __DIR__ . '/run-test-info.php'; > @unlink($info_file); > $php_info = ' `PHP_SAPI` : " , `PHP_SAPI` , " > `PHP_VERSION` : " , `phpversion()` , " > ZEND_VERSION: " , `zend_version()` , " > `PHP_OS` : " , `PHP_OS` , " - " , `php_uname()` , " > INI actual : " , realpath(get_cfg_var("cfg_file_path")) , " > More .INIs : " , (function_exists(\'php_ini_scanned_files\') ? > str_replace("\n","", `php_ini_scanned_files()`) : "** not determined **"); ?>'; > save_text($info_file, $php_info); > $info_params = array(); > settings2array($ini_overwrites, $info_params); > settings2params($info_params); > $php_info = `$php $pass_options $info_params "$info_file"`; > define('TESTED_PHP_VERSION', `$php -r "echo PHP_VERSION;"`); > if ($php_cgi && $php != $php_cgi) { > $php_info_cgi = `$php_cgi $pass_options $info_params -q "$info_file"`; > $php_info_sep = > "\n---------------------------------------------------------------------"; > $php_cgi_info = "$php_info_sep\nPHP : $php_cgi $php_info_cgi$php_info_sep"; > } else { > $php_cgi_info = ''; > } > @unlink($info_file); > // load list of enabled extensions > save_text($info_file, ''); > $exts_to_test = explode(', ',`$php $pass_options $info_params "$info_file"`); > // check for extensions that need special handling and regenerate > $info_params_ex = array( > 'session' => array('session.auto_start=0'), > 'tidy' => array('tidy.clean_output=0'), > 'zlib' => array('zlib.output_compression=Off'), > 'xdebug' => array('xdebug.default_enable=0'), > ); > foreach($info_params_ex as $ext => $ini_overwrites_ex) { > if (in_array($ext, $exts_to_test)) { > $ini_overwrites = array_merge($ini_overwrites, $ini_overwrites_ex); > } > } > @unlink($info_file); > // Write test context information. > echo " > ===================================================================== > PHP : $php $php_info $php_cgi_info > CWD : $cwd > Extra dirs : "; > foreach ($user_tests as $test_dir) { > echo "{$test_dir}\n "; > } > echo " > VALGRIND : " . ($leak_check ? $valgrind_header : 'Not used') . " > ===================================================================== > "; > } > // Determine the tests to be run. > $test_files = array(); > $redir_tests = array(); > $test_results = array(); > $PHP_FAILED_TESTS = array('BORKED' => array(), 'FAILED' => array(), > 'WARNED' => array(), 'LEAKED' => array(), 'XFAILED' => array()); > // If parameters given assume they represent selected tests to run. > $failed_tests_file= false; > $pass_option_n = false; > $pass_options = ''; > $compression = 0; > $output_file = $CUR_DIR . '/php_test_results_' . @date('Ymd_Hi') . '.txt'; > if ($compression) { > $output_file = 'compress.zlib://' . $output_file . '.gz'; > } > $just_save_results = false; > $leak_check = false; > $html_output = false; > $html_file = null; > $temp_source = null; > $temp_target = null; > $temp_urlbase = null; > $conf_passed = null; > $no_clean = false; > $cfgtypes = array('show', 'keep'); > $cfgfiles = array('skip', 'php', 'clean', 'out', 'diff', 'exp'); > $cfg = array(); > foreach($cfgtypes as $type) { > $cfg[$type] = array(); > foreach($cfgfiles as $file) { > $cfg[$type][$file] = false; > } > } > if (getenv('TEST_PHP_ARGS')) > { > if (!isset($argc) || !$argc || !isset($argv)) { > $argv = array(__FILE__); > } > $argv = array_merge($argv, split(' ', getenv('TEST_PHP_ARGS'))); > $argc = count($argv); > } > if (isset($argc) && $argc > 1) { > for ($i=1; $i<$argc; $i++) { > $is_switch = false; > $switch = substr($argv[$i],1,1); > $repeat = substr($argv[$i],0,1) == '-'; > while ($repeat) { > if (!$is_switch) { > $switch = substr($argv[$i],1,1); > } > $is_switch = true; > if ($repeat) { > foreach($cfgtypes as $type) { > if (strpos($switch, '--' . $type) === 0) { > foreach($cfgfiles as $file) { > if ($switch == '--' . $type.'-' . $file) { > $cfg[$type][$file] = true; > $is_switch = false; > break; > } > } > } > } > } > if (!$is_switch) { > $is_switch = true; > break; > } > $repeat = false; > switch($switch) { > case 'r': > case 'l': > $test_list = @file($argv[++$i]); > if ($test_list) { > foreach($test_list as $test) { > $matches = array(); > if > (preg_match('/^#.*\[(.*)\]\:\s+(.*)$/', $test, $matches)) { > > $redir_tests[] = array($matches[1], $matches[2]); > } else if (strlen($test)) { > $test_files[] = trim($test); > } > } > } > if ($switch != 'l') { > break; > } > $i--; > // break left intentionally > case 'w': > $failed_tests_file = fopen($argv[++$i], 'w+t'); > break; > case 'a': > $failed_tests_file = fopen($argv[++$i], 'a+t'); > break; > case 'c': > $conf_passed = $argv[++$i]; > break; > case 'd': > $ini_overwrites[] = $argv[++$i]; > break; > //case 'h' > case '--keep-all': > foreach($cfgfiles as $file) { > $cfg['keep'][$file] = true; > } > break; > //case 'l' > case 'm': > $leak_check = true; > $valgrind_cmd = "valgrind --version"; > $valgrind_header = system_with_timeout($valgrind_cmd); > $replace_count = 0; > if (!$valgrind_header) { > error("Valgrind returned > no version info, cannot proceed.\nPlease check if Valgrind is installed."); > } else { > $valgrind_version = > preg_replace("/valgrind-([0-9])\.([0-9])\.([0-9]+)(-\w+)?(\s+)/", > '$1$2$3', $valgrind_header, 1, $replace_count); > if ($replace_count != 1 > || !is_numeric($valgrind_version)) { > error("Valgrind > returned invalid version info (\"$valgrind_header\"), cannot proceed."); > } > $valgrind_header = trim($valgrind_header); > } > break; > case 'n': > if (!$pass_option_n) { > $pass_options .= ' -n'; > } > $pass_option_n = true; > break; > case '--no-clean': > $no_clean = true; > break; > case 'p': > $php = $argv[++$i]; > putenv("TEST_PHP_EXECUTABLE=$php"); > break; > case 'q': > putenv('NO_INTERACTION=1'); > break; > //case 'r' > case 's': > $output_file = $argv[++$i]; > $just_save_results = true; > break; > case '--show-all': > foreach($cfgfiles as $file) { > $cfg['show'][$file] = true; > } > break; > case '--temp-source': > $temp_source = $argv[++$i]; > break; > case '--temp-target': > $temp_target = $argv[++$i]; > if ($temp_urlbase) { > $temp_urlbase = $temp_target; > } > break; > case '--temp-urlbase': > $temp_urlbase = $argv[++$i]; > break; > case 'v': > case '--verbose': > $DETAILED = true; > break; > //case 'w' > case '-': > // repeat check with full switch > $switch = $argv[$i]; > if ($switch != '-') { > $repeat = true; > } > break; > case '--html': > $html_file = @fopen($argv[++$i], 'wt'); > $html_output = is_resource($html_file); > break; > case '--version': > echo '$Revision: 1.349 $'."\n"; > exit(1); > default: > echo "Illegal switch specified!\n"; > //break > case 'h': > case '-help': > case '--help': > echo << Synopsis: > php run-tests.php [options] [files] [directories] > Options: > -l Read the testfiles to be executed from . After the test > has finished all failed tests are written to the same . > If the list is empty and no further test is specified then > all tests are executed (same as: -r -w ). > -r Read the testfiles to be executed from . > -w Write a list of all failed tests to . > -a Same as -w but append rather then truncating . > -c Look for php.ini in directory or use as ini. > -n Pass -n option to the php binary (Do not use a php.ini). > -d foo=bar Pass -d option to the php binary (Define INI entry foo > with value 'bar'). > -m Test for memory leaks with Valgrind. > -p Specify PHP executable to run. > > -q Quiet, no user interaction (same as environment NO_INTERACTION). > -s Write output to . > --verbose > -v Verbose mode. > --help > -h This Help. > --html Generate HTML output. > --temp-source --temp-target [--temp-urlbase ] > Write temporary files to by replacing from the > filenames to generate with . If --html is being used and > given then the generated links are relative and prefixed > with the given url. In general you want to make the path > to your source files and some pach in your web page > hierarchy with pointing to . > --keep-[all|php|skip|clean] > Do not delete 'all' files, 'php' test file, 'skip' or 'clean' > file. > --show-[all|php|skip|clean|exp|diff|out] > Show 'all' files, 'php' test file, 'skip' or 'clean' file. You > can also use this to show the output 'out', the expected result > 'exp' or the difference between them 'diff'. The result types > get written independent of the log format, however 'diff' only > exists when a test fails. > --no-clean Do not execute clean section if any. > HELP; > exit(1); > } > } > if (!$is_switch) { > $testfile = realpath($argv[$i]); > if (!$testfile && strpos($argv[$i], '*') !== false && function_exists('glob')) { > if (preg_match("/\.phpt$/", $argv[$i])) { > $pattern_match = glob($argv[$i]); > } else if (preg_match("/\*$/", $argv[$i])) { > $pattern_match = glob($argv[$i] . '.phpt'); > } else { > die("bogus test name " . $argv[$i] . "\n"); > } > if (is_array($pattern_match)) { > $test_files = > array_merge($test_files, $pattern_match); > } > } else if (is_dir($testfile)) { > find_files($testfile); > } else if (preg_match("/\.phpt$/", $testfile)) { > $test_files[] = $testfile; > } else { > die("bogus test name " . $argv[$i] . "\n"); > } > } > } > if (strlen($conf_passed)) { > $pass_options .= " -c '$conf_passed'"; > } > $test_files = array_unique($test_files); > $test_files = array_merge($test_files, $redir_tests); > // Run selected tests. > $test_cnt = count($test_files); > if ($test_cnt) { > verify_config(); > write_information($html_output); > usort($test_files, "test_sort"); > $start_time = `time()`; > if (!$html_output) { > echo "Running selected tests.\n"; > } else { > show_start($start_time); > } > $test_idx = 0; > run_all_tests($test_files, $environment); > $end_time = `time()`; > if ($html_output) { > show_end($end_time); > } > if ($failed_tests_file) { > fclose($failed_tests_file); > } > if (count($test_files) || count($test_results)) { > compute_summary(); > if ($html_output) { > fwrite($html_file, "
\n" . get_summary(false, true)); > } > echo > "====================================================================="; > echo get_summary(false, false); > } > if ($html_output) { > fclose($html_file); > } > if (getenv('REPORT_EXIT_STATUS') == 1 and > preg_match('/FAILED(?: |$)/', implode(' ', $test_results))) { > exit(1); > } > exit(0); > } > } > verify_config(); > write_information($html_output); > // Compile a list of all test files (*.phpt). > $test_files = array(); > $exts_tested = count($exts_to_test); > $exts_skipped = 0; > $ignored_by_ext = 0; > sort($exts_to_test); > $test_dirs = array(); > $optionals = array('tests', 'ext', 'Zend', 'ZendEngine2', 'sapi/cli', 'sapi/cgi'); > foreach($optionals as $dir) { > if (@filetype($dir) == 'dir') { > $test_dirs[] = $dir; > } > } > // Convert extension names to lowercase > foreach ($exts_to_test as $key => $val) { > $exts_to_test[$key] = strtolower($val); > } > foreach ($test_dirs as $dir) { > find_files("{$cwd}/{$dir}", ($dir == 'ext')); > } > foreach ($user_tests as $dir) { > find_files($dir, ($dir == 'ext')); > } > function find_files($dir, $is_ext_dir = false, $ignore = false) > { > global $test_files, $exts_to_test, $ignored_by_ext, $exts_skipped, $exts_tested; > $o = opendir($dir) or error("cannot open directory: $dir"); > while (($name = readdir($o)) !== false) { > if (is_dir("{$dir}/{$name}") && !in_array($name, array('.', '..', 'CVS'))) { > $skip_ext = ($is_ext_dir && > !in_array(strtolower($name), $exts_to_test)); > if ($skip_ext) { > $exts_skipped++; > } > find_files("{$dir}/{$name}", false, $ignore || $skip_ext); > } > // Cleanup any left-over tmp files from last run. > if (substr($name, -4) == '.tmp') { > @unlink("$dir/$name"); > continue; > } > // Otherwise we're only interested in *.phpt files. > if (substr($name, -5) == '.phpt') { > if ($ignore) { > $ignored_by_ext++; > } else { > $testfile = realpath("{$dir}/{$name}"); > $test_files[] = $testfile; > } > } > } > closedir($o); > } > function test_name($name) > { > if (is_array($name)) { > return $name[0] . ':' . $name[1]; > } else { > return $name; > } > } > function test_sort($a, $b) > { > global $cwd; > > $a = test_name($a); > $b = test_name($b); > $ta = strpos($a, "{$cwd}/tests") === 0 ? 1 + (strpos($a, > "{$cwd}/tests/run-test") === 0 ? 1 : 0) : 0; > $tb = strpos($b, "{$cwd}/tests") === 0 ? 1 + (strpos($b, > "{$cwd}/tests/run-test") === 0 ? 1 : 0) : 0; > if ($ta == $tb) { > return strcmp($a, $b); > } else { > return $tb - $ta; > } > } > $test_files = array_unique($test_files); > usort($test_files, "test_sort"); > $start_time = `time()`; > show_start($start_time); > $test_cnt = count($test_files); > $test_idx = 0; > run_all_tests($test_files, $environment); > $end_time = `time()`; > if ($failed_tests_file) { > fclose($failed_tests_file); > } > // Summarize results > if (0 == count($test_results)) { > echo "No tests were run.\n"; > return; > } > compute_summary(); > show_end($end_time); > show_summary(); > if ($html_output) { > fclose($html_file); > } > define('PHP_QA_EMAIL', 'qa-reports@lists.php.net'); > define('QA_SUBMISSION_PAGE', 'http://qa.php.net/buildtest-process.php'); > /* We got failed Tests, offer the user to send an e-mail to QA team, unless NO_INTERACTION is set */ > if (!getenv('NO_INTERACTION')) { > $fp = fopen("php://stdin", "r+"); > if ($sum_results['FAILED'] || $sum_results['BORKED'] || > $sum_results['WARNED'] || $sum_results['LEAKED']|| $sum_results['XFAILED']) { > echo "\nYou may have found a problem in PHP."; > } > echo "\nWe would like to send this report automatically to the\n"; > echo "PHP QA team, to give us a better understanding of how\nthe > test cases are doing. If you don't want to send it\n"; > echo "immediately, you can choose \"s\" to save the report to\na > file that you can send us later.\n"; > echo "Do you want to send this report now? [Yns]: "; > `flush()`; > $user_input = fgets($fp, 10); > $just_save_results = (strtolower($user_input[0]) == 's'); > } > if ($just_save_results || !getenv('NO_INTERACTION')) { > if ($just_save_results || strlen(trim($user_input)) == 0 || > strtolower($user_input[0]) == 'y') { > /* > * Collect information about the host system for our report > * Fetch `phpinfo()` output so that we can see the PHP enviroment > * Make an archive of all the failed tests > * Send an email > */ > if ($just_save_results) { > $user_input = 's'; > } > /* Ask the user to provide an email address, so that QA team can contact the user */ > if (!strncasecmp($user_input, 'y', 1) || strlen(trim($user_input)) == 0) { > echo "\nPlease enter your email address.\n(Your > address will be mangled so that it will not go out on any\nmailinglist in plain text): "; > `flush()`; > $user_email = trim(fgets($fp, 1024)); > $user_email = str_replace("@", " at ", > str_replace(".", " dot ", $user_email)); > } > $failed_tests_data = ''; > $sep = "\n" . str_repeat('=', 80) . "\n"; > $failed_tests_data .= $failed_test_summary . "\n"; > $failed_tests_data .= get_summary(true, false) . "\n"; > if ($sum_results['FAILED']) { > foreach ($PHP_FAILED_TESTS['FAILED'] as $test_info) { > $failed_tests_data .= $sep . > $test_info['name'] . $test_info['info']; > $failed_tests_data .= $sep . > file_get_contents(realpath($test_info['output'])); > $failed_tests_data .= $sep . > file_get_contents(realpath($test_info['diff'])); > $failed_tests_data .= $sep . "\n\n"; > } > $status = "failed"; > } else { > $status = "success"; > } > $failed_tests_data .= "\n" . $sep . 'BUILD ENVIRONMENT' . $sep; > $failed_tests_data .= "OS:\n" . `PHP_OS` . " - " . `php_uname()` . "\n\n"; > $ldd = $autoconf = $sys_libtool = $libtool = $compiler = 'N/A'; > if (substr(PHP_OS, 0, 3) != "WIN") { > /* If PHP_AUTOCONF is set, use it; otherwise, use 'autoconf'. */ > if (getenv('PHP_AUTOCONF')) { > $autoconf = > shell_exec(getenv('PHP_AUTOCONF') . ' --version'); > } else { > $autoconf = shell_exec('autoconf --version'); > } > /* Always use the generated libtool - Mac OSX uses 'glibtool' */ > $libtool = shell_exec($CUR_DIR . '/libtool --version'); > /* Use shtool to find out if there is glibtool present (MacOSX) */ > $sys_libtool_path = shell_exec(__DIR__ . > '/build/shtool path glibtool libtool'); > if ($sys_libtool_path) { > $sys_libtool = > shell_exec(str_replace("\n", "", $sys_libtool_path) . ' --version'); > } > /* Try the most common flags for 'version' */ > $flags = array('-v', '-V', '--version'); > $cc_status=0; > foreach($flags AS $flag) { > system(getenv('CC')." $flag >/dev/null 2>&1", $cc_status); > if ($cc_status == 0) { > $compiler = > shell_exec(getenv('CC')." $flag 2>&1"); > break; > } > } > $ldd = shell_exec("ldd $php 2>/dev/null"); > } > $failed_tests_data .= "Autoconf:\n$autoconf\n"; > $failed_tests_data .= "Bundled Libtool:\n$libtool\n"; > $failed_tests_data .= "System Libtool:\n$sys_libtool\n"; > $failed_tests_data .= "Compiler:\n$compiler\n"; > $failed_tests_data .= "Bison:\n". @shell_exec('bison --version 2>/dev/null'). "\n"; > $failed_tests_data .= "Libraries:\n$ldd\n"; > $failed_tests_data .= "\n"; > if (isset($user_email)) { > $failed_tests_data .= "User's E-mail: " . $user_email."\n\n"; > } > $failed_tests_data .= $sep . "PHPINFO" . $sep; > $failed_tests_data .= shell_exec($php.' -dhtml_errors=0 -i'); > if ($just_save_results || > !mail_qa_team($failed_tests_data, $compression, $status)) { > file_put_contents($output_file, $failed_tests_data); > if (!$just_save_results) { > echo "\nThe test script was unable to > automatically send the report to PHP's QA Team\n"; > } > echo "Please send " . $output_file." to > ".PHP_QA_EMAIL." manually, thank you.\n"; > } else { > fwrite($fp, "\nThank you for helping to make PHP better.\n"); > fclose($fp); > } > } > } > > if (getenv('REPORT_EXIT_STATUS') == 1 and $sum_results['FAILED']) { > exit(1); > } > exit(0); > // > // Send Email to QA Team > // > function mail_qa_team($data, $compression, $status = false) > { > $url_bits = parse_url(QA_SUBMISSION_PAGE); > if (empty($url_bits['port'])) { > $url_bits['port'] = 80; > } > $data = "php_test_data=" . > urlencode(base64_encode(str_replace("\00", '[0x0]', $data))); > $data_length = strlen($data); > > $fs = fsockopen($url_bits['host'], $url_bits['port'], $errno, $errstr, 10); > if (!$fs) { > return false; > } > $php_version = urlencode(TESTED_PHP_VERSION); > echo "\nPosting to {$url_bits['host']} {$url_bits['path']}\n"; > fwrite($fs, "POST " . > $url_bits['path']."?status=$status&version=$php_version HTTP/1.1\r\n"); > fwrite($fs, "Host: " . $url_bits['host']."\r\n"); > fwrite($fs, "User-Agent: QA Browser 0.1\r\n"); > fwrite($fs, "Content-Type: application/x-www-form-urlencoded\r\n"); > fwrite($fs, "Content-Length: " . $data_length."\r\n\r\n"); > fwrite($fs, $data); > fwrite($fs, "\r\n\r\n"); > fclose($fs); > return 1; > } > // > // Write the given text to a temporary file, and return the filename. > // > function save_text($filename, $text, $filename_copy = null) > { > global $DETAILED; > if ($filename_copy && $filename_copy != $filename) { > if (@file_put_contents($filename_copy, $text) === false) { > error("Cannot open file '" . $filename_copy . "' (save_text)"); > } > } > if (@file_put_contents($filename, $text) === false) { > error("Cannot open file '" . $filename . "' (save_text)"); > } > if (1 < $DETAILED) echo " > FILE $filename {{{ > $text > }}} > "; > } > // > // Write an error in a format recognizable to Emacs or MSVC. > // > function error_report($testname, $logname, $tested) > { > $testname = realpath($testname); > $logname = realpath($logname); > switch (strtoupper(getenv('TEST_PHP_ERROR_STYLE'))) { > case 'MSVC': > echo $testname . "(1) : $tested\n"; > echo $logname . "(1) : $tested\n"; > break; > case 'EMACS': > echo $testname . ":1: $tested\n"; > echo $logname . ":1: $tested\n"; > break; > } > } > function system_with_timeout($commandline, $env = null, $stdin = null) > { > global $leak_check; > $data = ""; > $proc = proc_open($commandline, array( > 0 => array('pipe', 'r'), > 1 => array('pipe', 'w'), > 2 => array('pipe', 'w') > ), $pipes, null, $env, array("suppress_errors" => true, "binary_pipes" => true)); > if (!$proc) { > return false; > } > if (!is_null($stdin)) { > @fwrite($pipes[0], $stdin); > } > fclose($pipes[0]); > while (true) { > /* hide errors from interrupted syscalls */ > $r = $pipes; > $w = null; > $e = null; > $n = @stream_select($r, $w, $e, $leak_check ? 300 : 60); > if ($n === false) { > break; > } else if ($n === 0) { > /* timed out */ > $data .= "\n ** ERROR: process timed out **\n"; > proc_terminate($proc); > return $data; > } else if ($n > 0) { > $line = fread($pipes[1], 8192); > if ($line === false) { > /* EOF */ > break; > } > if (is_binary($line)) { > $data = (binary)$data; > } > $data .= $line; > } > } > $stat = proc_get_status($proc); > if ($stat['signaled']) { > $data .= "\nTermsig=" . $stat['stopsig']; > } > $code = proc_close($proc); > return $data; > } > function run_all_tests($test_files, $env, $redir_tested = null) > { > global $test_results, $failed_tests_file, $php, $test_cnt, $test_idx; > foreach($test_files as $name) { > if (is_array($name)) { > $index = "# $name[1]: $name[0]"; > if ($redir_tested) { > $name = $name[0]; > } > } > else if ($redir_tested) { > $index = "# $redir_tested: $name"; > } else { > $index = $name; > } > $test_idx++; > $result = run_test($php, $name, $env); > if (!is_array($name) && $result != 'REDIR') { > $test_results[$index] = $result; > if ($failed_tests_file && ($result== 'XFAILED' > || $result == 'FAILED' || $result == 'WARNED' || $result == 'LEAKED')) { > fwrite($failed_tests_file, "$index\n"); > } > } > } > } > // > // Show file or result block > // > function show_file_block($file, $block, $section = null) > { > global $cfg; > if ($cfg['show'][$file]) { > if (is_null($section)) { > $section = strtoupper($file); > } > echo "\n========" . $section."========\n"; > echo rtrim($block); > echo "\n========DONE========\n"; > } > } > // > // Run an individual test case. > // > function run_test($php, $file, $env) > { > global $log_format, $info_params, $ini_overwrites, $cwd, $PHP_FAILED_TESTS; > global $pass_options, $DETAILED, $IN_REDIRECT, $test_cnt, $test_idx; > global $leak_check, $temp_source, $temp_target, $cfg, $environment; > global $no_clean; > global $valgrind_version; > $temp_filenames = null; > $org_file = $file; > if (isset($env['TEST_PHP_CGI_EXECUTABLE'])) { > $php_cgi = $env['TEST_PHP_CGI_EXECUTABLE']; > } > if (is_array($file)) { > $file = $file[0]; > } > if ($DETAILED) echo " > ================= > TEST $file > "; > // Load the sections of the test file. > $section_text = array('TEST' => ''); > $fp = fopen($file, "rt") or error("Cannot open test file: $file"); > $borked = false; > $bork_info = ''; > if (!feof($fp)) { > $line = fgets($fp); > if ($line === false) { > $bork_info = "cannot read test"; > $borked = true; > } > } else { > $bork_info = "empty test"; > $borked = true; > } > if (!$borked && strncmp('--TEST--', $line, 8)) { > $bork_info = "tests must start with --TEST--"; > $borked = true; > } > $section = 'TEST'; > $secfile = false; > $secdone = false; > while (!feof($fp)) { > $line = fgets($fp); > // Match the beginning of a section. > if (preg_match('/^--([_A-Z]+)--/', $line, $r)) { > $section = $r[1]; > if (isset($section_text[$section])) { > $bork_info = "duplicated $section section"; > $borked = true; > } > $section_text[$section] = ''; > $secfile = $section == 'FILE' || $section == > 'FILEEOF' || $section == 'FILE_EXTERNAL'; > $secdone = false; > continue; > } > // Add to the section text. > if (!$secdone) { > $section_text[$section] .= $line; > } > // End of actual test? > if ($secfile && preg_match('/^===DONE===\s*$/', $line)) { > $secdone = true; > } > } > // the redirect section allows a set of tests to be reused outside of > // a given test dir > if (!$borked) { > if (@count($section_text['REDIRECTTEST']) == 1) { > > if ($IN_REDIRECT) { > $borked = true; > $bork_info = "Can't redirect a test from within a redirected test"; > } else { > $borked = false; > } > } else { > if (@count($section_text['FILE']) + > @count($section_text['FILEEOF']) + @count($section_text['FILE_EXTERNAL']) != 1) { > $bork_info = "missing section --FILE--"; > $borked = true; > } > if (@count($section_text['FILEEOF']) == 1) { > $section_text['FILE'] = > preg_replace("/[\r\n]+$/", '', $section_text['FILEEOF']); > unset($section_text['FILEEOF']); > } > if (@count($section_text['FILE_EXTERNAL']) == 1) { > // don't allow tests to retrieve files from anywhere but this subdirectory > $section_text['FILE_EXTERNAL'] = > dirname($file) . '/' . trim(str_replace('..', '', $section_text['FILE_EXTERNAL'])); > if > (@file_exists($section_text['FILE_EXTERNAL'])) { > $section_text['FILE'] = > file_get_contents($section_text['FILE_EXTERNAL']); > > unset($section_text['FILE_EXTERNAL']); > } else { > $bork_info = "could not load > --FILE_EXTERNAL-- " . dirname($file) . '/' . > trim($section_text['FILE_EXTERNAL']); > $borked = true; > } > } > if ((@count($section_text['EXPECT']) + > @count($section_text['EXPECTF']) + @count($section_text['EXPECTREGEX'])) != 1) { > $bork_info = "missing section > --EXPECT--, --EXPECTF-- or --EXPECTREGEX--"; > $borked = true; > } > } > } > fclose($fp); > $shortname = str_replace($cwd.'/', '', $file); > $tested_file = $shortname; > if ($borked) { > show_result("BORK", $bork_info, $tested_file); > $PHP_FAILED_TESTS['BORKED'][] = array ( > 'name' => $file, > 'test_name' => '', > 'output' => '', > 'diff' => '', > 'info' => "$bork_info [$file]", > ); > return 'BORKED'; > } > $tested = trim($section_text['TEST']); > /* For GET/POST tests, check if cgi sapi is available and if it is, use it. */ > if (!empty($section_text['GET']) || > !empty($section_text['POST']) || !empty($section_text['POST_RAW']) || > !empty($section_text['COOKIE']) || > !empty($section_text['EXPECTHEADERS'])) { > if (isset($php_cgi)) { > $old_php = $php; > $php = $php_cgi .' -C '; > } else if (!strncasecmp(PHP_OS, "win", 3) && > file_exists(dirname($php) ."/php-cgi.exe")) { > $old_php = $php; > $php = realpath(dirname($php) ."/php-cgi.exe") .' -C '; > } else { > if > (file_exists(dirname($php)."/../../sapi/cgi/php-cgi")) { > $old_php = $php; > $php = > realpath(dirname($php)."/../../sapi/cgi/php-cgi") . ' -C '; > } else if (file_exists("./sapi/cgi/php-cgi")) { > $old_php = $php; > $php = realpath("./sapi/cgi/php-cgi") . ' -C '; > } else { > show_result("SKIP", $tested, > $tested_file, "reason: CGI not available"); > return 'SKIPPED'; > } > } > } > show_test($test_idx, $shortname); > if (is_array($IN_REDIRECT)) { > $temp_dir = $test_dir = $IN_REDIRECT['dir']; > } else { > $temp_dir = $test_dir = realpath(dirname($file)); > } > if ($temp_source && $temp_target) { > $temp_dir = str_replace($temp_source, $temp_target, $temp_dir); > } > $diff_filename = $temp_dir . `DIRECTORY_SEPARATOR` . basename($file, 'phpt') . 'diff'; > $log_filename = $temp_dir . `DIRECTORY_SEPARATOR` . basename($file, 'phpt') . 'log'; > $exp_filename = $temp_dir . `DIRECTORY_SEPARATOR` . basename($file, 'phpt') . 'exp'; > $output_filename = $temp_dir . `DIRECTORY_SEPARATOR` . basename($file, 'phpt') . 'out'; > $memcheck_filename = $temp_dir . `DIRECTORY_SEPARATOR` . basename($file, 'phpt') . 'mem'; > $temp_file = $temp_dir . `DIRECTORY_SEPARATOR` . basename($file, 'phpt') . 'php'; > $test_file = $test_dir . `DIRECTORY_SEPARATOR` . basename($file, 'phpt') . 'php'; > $temp_skipif = $temp_dir . `DIRECTORY_SEPARATOR` . > basename($file, 'phpt') . 'skip.php'; > $test_skipif = $test_dir . `DIRECTORY_SEPARATOR` . > basename($file, 'phpt') . 'skip.php'; > $temp_clean = $temp_dir . `DIRECTORY_SEPARATOR` . > basename($file, 'phpt') . 'clean.php'; > $test_clean = $test_dir . `DIRECTORY_SEPARATOR` . > basename($file, 'phpt') . 'clean.php'; > $tmp_post = $temp_dir . `DIRECTORY_SEPARATOR` . uniqid('/phpt.'); > $tmp_relative_file = str_replace(__DIR__ . DIRECTORY_SEPARATOR, '', $test_file) . 't'; > if ($temp_source && $temp_target) { > $temp_skipif .= 's'; > $temp_file .= 's'; > $temp_clean .= 's'; > $copy_file = $temp_dir . `DIRECTORY_SEPARATOR` . > basename(is_array($file) ? $file[1] : $file) . '.phps'; > if (!is_dir(dirname($copy_file))) { > @mkdir(dirname($copy_file), 0777, true) or > error("Cannot create output directory - " . dirname($copy_file)); > } > if (isset($section_text['FILE'])) { > save_text($copy_file, $section_text['FILE']); > } > $temp_filenames = array( > 'file' => $copy_file, > 'diff' => $diff_filename, > 'log' => $log_filename, > 'exp' => $exp_filename, > 'out' => $output_filename, > 'mem' => $memcheck_filename, > 'php' => $temp_file, > 'skip' => $temp_skipif, > 'clean'=> $temp_clean); > } > if (is_array($IN_REDIRECT)) { > $tested = $IN_REDIRECT['prefix'] . ' ' . trim($section_text['TEST']); > $tested_file = $tmp_relative_file; > $section_text['FILE'] = "# original source file: > $shortname\n" . $section_text['FILE']; > } > // unlink old test results > @unlink($diff_filename); > @unlink($log_filename); > @unlink($exp_filename); > @unlink($output_filename); > @unlink($memcheck_filename); > @unlink($temp_file); > @unlink($test_file); > @unlink($temp_skipif); > @unlink($test_skipif); > @unlink($tmp_post); > @unlink($temp_clean); > @unlink($test_clean); > // Reset environment from any previous test. > $env['REDIRECT_STATUS'] = ''; > $env['QUERY_STRING'] = ''; > $env['PATH_TRANSLATED'] = ''; > $env['SCRIPT_FILENAME'] = ''; > $env['REQUEST_METHOD'] = ''; > $env['CONTENT_TYPE'] = ''; > $env['CONTENT_LENGTH'] = ''; > if (!empty($section_text['ENV'])) { > foreach(explode("\n", trim($section_text['ENV'])) as $e) { > $e = explode('=', trim($e),2); > if (!empty($e[0]) && isset($e[1])) { > $env[$e[0]] = $e[1]; > } > } > } > // Default ini settings > $ini_settings = array(); > // additional ini overwrites > //$ini_overwrites[] = 'setting=value'; > settings2array($ini_overwrites, $ini_settings); > // Any special ini settings > // these may overwrite the test defaults... > if (array_key_exists('INI', $section_text)) { > if (strpos($section_text['INI'], '{PWD}') !== false) { > $section_text['INI'] = str_replace('{PWD}', > dirname($file), $section_text['INI']); > } > settings2array(preg_split( "/[\n\r]+/", > $section_text['INI']), $ini_settings); > } > settings2params($ini_settings); > // Check if test should be skipped. > $info = ''; > $warn = false; > if (array_key_exists('SKIPIF', $section_text)) { > if (trim($section_text['SKIPIF'])) { > show_file_block('skip', $section_text['SKIPIF']); > save_text($test_skipif, $section_text['SKIPIF'], $temp_skipif); > $extra = substr(PHP_OS, 0, 3) !== "WIN" ? > "unset REQUEST_METHOD; unset > QUERY_STRING; unset PATH_TRANSLATED; unset SCRIPT_FILENAME; unset REQUEST_METHOD;": ""; > if ($leak_check) { > $env['USE_ZEND_ALLOC'] = '0'; > } else { > $env['USE_ZEND_ALLOC'] = '1'; > } > $output = system_with_timeout("$extra $php > $pass_options -q $ini_settings $test_skipif", $env); > if (!$cfg['keep']['skip']) { > @unlink($test_skipif); > } > if (!strncasecmp('skip', ltrim($output), 4)) { > if (preg_match('/^\s*skip\s*(.+)\s*/i', $output, $m)) { > show_result("SKIP", $tested, > $tested_file, "reason: $m[1]", $temp_filenames); > } else { > show_result("SKIP", $tested, $tested_file, '', $temp_filenames); > } > if (isset($old_php)) { > $php = $old_php; > } > if (!$cfg['keep']['skip']) { > @unlink($test_skipif); > } > return 'SKIPPED'; > } > if (!strncasecmp('info', ltrim($output), 4)) { > if (preg_match('/^\s*info\s*(.+)\s*/i', $output, $m)) { > $info = " (info: $m[1])"; > } > } > if (!strncasecmp('warn', ltrim($output), 4)) { > if (preg_match('/^\s*warn\s*(.+)\s*/i', $output, $m)) { > $warn = true; /* only if there is a reason */ > $info = " (warn: $m[1])"; > } > } > } > } > if (@count($section_text['REDIRECTTEST']) == 1) { > $test_files = array(); > $IN_REDIRECT = eval($section_text['REDIRECTTEST']); > $IN_REDIRECT['via'] = "via [$shortname]\n\t"; > $IN_REDIRECT['dir'] = realpath(dirname($file)); > $IN_REDIRECT['prefix'] = trim($section_text['TEST']); > if (@count($IN_REDIRECT['TESTS']) == 1) { > if (is_array($org_file)) { > $test_files[] = $org_file[1]; > } else { > $GLOBALS['test_files'] = $test_files; > find_files($IN_REDIRECT['TESTS']); > foreach($GLOBALS['test_files'] as $f) { > $test_files[] = array($f, $file); > } > } > $test_cnt += (count($test_files) - 1); > $test_idx--; > show_redirect_start($IN_REDIRECT['TESTS'], $tested, $tested_file); > // set up environment > $redirenv = array_merge($environment, $IN_REDIRECT['ENV']); > $redirenv['REDIR_TEST_DIR'] = > realpath($IN_REDIRECT['TESTS']) . DIRECTORY_SEPARATOR; > usort($test_files, "test_sort"); > run_all_tests($test_files, $redirenv, $tested); > show_redirect_ends($IN_REDIRECT['TESTS'], $tested, $tested_file); > // a redirected test never fails > $IN_REDIRECT = false; > return 'REDIR'; > } else { > $bork_info = "Redirect info must contain exactly > one TEST string to be used as redirect directory."; > show_result("BORK", $bork_info, '', $temp_filenames); > $PHP_FAILED_TESTS['BORKED'][] = array ( > 'name' => $file, > 'test_name' => '', > 'output' => '', > 'diff' => '', > 'info' => "$bork_info [$file]", > ); > } > } > if (is_array($org_file) || @count($section_text['REDIRECTTEST']) == 1) { > if (is_array($org_file)) { > $file = $org_file[0]; > } > $bork_info = "Redirected test did not contain redirection info"; > show_result("BORK", $bork_info, '', $temp_filenames); > $PHP_FAILED_TESTS['BORKED'][] = array ( > 'name' => $file, > 'test_name' => '', > 'output' => '', > 'diff' => '', > 'info' => "$bork_info [$file]", > ); > return 'BORKED'; > } > // We've satisfied the preconditions - run the test! > show_file_block('php', $section_text['FILE'], 'TEST'); > save_text($test_file, $section_text['FILE'], $temp_file); > if (array_key_exists('GET', $section_text)) { > $query_string = trim($section_text['GET']); > } else { > $query_string = ''; > } > $env['REDIRECT_STATUS'] = '1'; > $env['QUERY_STRING'] = $query_string; > $env['PATH_TRANSLATED'] = $test_file; > $env['SCRIPT_FILENAME'] = $test_file; > if (array_key_exists('COOKIE', $section_text)) { > $env['HTTP_COOKIE'] = trim($section_text['COOKIE']); > } else { > $env['HTTP_COOKIE'] = ''; > } > $args = isset($section_text['ARGS']) ? ' -- ' . $section_text['ARGS'] : ''; > if (array_key_exists('POST_RAW', $section_text) && > !empty($section_text['POST_RAW'])) { > $post = trim($section_text['POST_RAW']); > $raw_lines = explode("\n", $post); > $request = ''; > $started = false; > foreach ($raw_lines as $line) { > if (empty($env['CONTENT_TYPE']) && > preg_match('/^Content-Type:(.*)/i', $line, $res)) { > $env['CONTENT_TYPE'] = > trim(str_replace("\r", '', $res[1])); > continue; > } > if ($started) { > $request .= "\n"; > } > $started = true; > $request .= $line; > } > $env['CONTENT_LENGTH'] = strlen($request); > $env['REQUEST_METHOD'] = 'POST'; > if (empty($request)) { > return 'BORKED'; > } > save_text($tmp_post, $request); > $cmd = "$php$pass_options$ini_settings -f \"$test_file\" 2>&1 < $tmp_post"; > } elseif (array_key_exists('POST', $section_text) && !empty($section_text['POST'])) { > $post = trim($section_text['POST']); > if (array_key_exists('GZIP_POST', $section_text) && function_exists('gzencode')) { > $post = gzencode($post, 9, FORCE_GZIP); > $env['HTTP_CONTENT_ENCODING'] = 'gzip'; > } else if (array_key_exists('DEFLATE_POST', > $section_text) && function_exists('gzcompress')) { > $post = gzcompress($post, 9); > $env['HTTP_CONTENT_ENCODING'] = 'deflate'; > } > save_text($tmp_post, $post); > $content_length = strlen($post); > $env['REQUEST_METHOD'] = 'POST'; > $env['CONTENT_TYPE'] = > 'application/x-www-form-urlencoded'; > $env['CONTENT_LENGTH'] = $content_length; > $cmd = "$php$pass_options$ini_settings -f \"$test_file\" 2>&1 < $tmp_post"; > } else { > $env['REQUEST_METHOD'] = 'GET'; > $env['CONTENT_TYPE'] = ''; > $env['CONTENT_LENGTH'] = ''; > $cmd = "$php$pass_options$ini_settings -f \"$test_file\" $args 2>&1"; > } > if ($leak_check) { > $env['USE_ZEND_ALLOC'] = '0'; > if ($valgrind_version >= 330) { > /* valgrind 3.3.0+ doesn't have --log-file-exactly option */ > $cmd = "valgrind -q --tool=memcheck > --trace-children=yes --log-file=$memcheck_filename $cmd"; > } else { > $cmd = "valgrind -q --tool=memcheck > --trace-children=yes --log-file-exactly=$memcheck_filename $cmd"; > } > } else { > $env['USE_ZEND_ALLOC'] = '1'; > } > if ($DETAILED) echo " > CONTENT_LENGTH = " . $env['CONTENT_LENGTH'] . " > CONTENT_TYPE = " . $env['CONTENT_TYPE'] . " > PATH_TRANSLATED = " . $env['PATH_TRANSLATED'] . " > QUERY_STRING = " . $env['QUERY_STRING'] . " > REDIRECT_STATUS = " . $env['REDIRECT_STATUS'] . " > REQUEST_METHOD = " . $env['REQUEST_METHOD'] . " > SCRIPT_FILENAME = " . $env['SCRIPT_FILENAME'] . " > HTTP_COOKIE = " . $env['HTTP_COOKIE'] . " > COMMAND $cmd > "; > $out = system_with_timeout($cmd, $env, > isset($section_text['STDIN']) ? $section_text['STDIN'] : null); > if (array_key_exists('CLEAN', $section_text) && (!$no_clean || $cfg['keep']['clean'])) { > if (trim($section_text['CLEAN'])) { > show_file_block('clean', $section_text['CLEAN']); > save_text($test_clean, > trim($section_text['CLEAN']), $temp_clean); > if (!$no_clean) { > $clean_params = array(); > settings2array($ini_overwrites, $clean_params); > settings2params($clean_params); > $extra = substr(PHP_OS, 0, 3) !== "WIN" ? > "unset REQUEST_METHOD; unset > QUERY_STRING; unset PATH_TRANSLATED; unset SCRIPT_FILENAME; unset REQUEST_METHOD;": ""; > system_with_timeout("$extra $php > $pass_options -q $clean_params $test_clean", $env); > } > if (!$cfg['keep']['clean']) { > @unlink($test_clean); > } > } > } > @unlink($tmp_post); > $leaked = false; > $passed = false; > if ($leak_check) { // leak check > $leaked = @filesize($memcheck_filename) > 0; > if (!$leaked) { > @unlink($memcheck_filename); > } > } > // Does the output match what is expected? > if (is_binary($out)) { > $output = preg_replace(b'/\r\n/', b"\n", trim($out)); > } else { > $output = str_replace("\r\n", "\n", trim($out)); > } > /* when using CGI, strip the headers from the output */ > $headers = ""; > if (isset($old_php) && preg_match("/^(.*?)\r?\n\r?\n(.*)/s", $out, $match)) { > $output = trim($match[2]); > $rh = preg_split("/[\n\r]+/", $match[1]); > $headers = array(); > foreach ($rh as $line) { > if (strpos($line, ':') !== false) { > $line = explode(':', $line, 2); > $headers[trim($line[0])] = trim($line[1]); > } > } > } > $failed_headers = false; > if (isset($section_text['EXPECTHEADERS'])) { > $want = array(); > $wanted_headers = array(); > $lines = preg_split("/[\n\r]+/", $section_text['EXPECTHEADERS']); > foreach($lines as $line) { > if (strpos($line, ':') !== false) { > $line = explode(':', $line, 2); > $want[trim($line[0])] = trim($line[1]); > $wanted_headers[] = trim($line[0]) . ': ' . trim($line[1]); > } > } > $org_headers = $headers; > $headers = array(); > $output_headers = array(); > foreach($want as $k => $v) { > if (isset($org_headers[$k])) { > $headers = $org_headers[$k]; > $output_headers[] = $k . ': ' . $org_headers[$k]; > } > if (!isset($org_headers[$k]) || $org_headers[$k] != $v) { > $failed_headers = true; > } > } > ksort($wanted_headers); > $wanted_headers = join("\n", $wanted_headers); > ksort($output_headers); > $output_headers = join("\n", $output_headers); > } > show_file_block('out', $output); > if (isset($section_text['EXPECTF']) || > isset($section_text['EXPECTREGEX'])) { > if (isset($section_text['EXPECTF'])) { > $wanted = trim($section_text['EXPECTF']); > } else { > $wanted = trim($section_text['EXPECTREGEX']); > } > show_file_block('exp', $wanted); > $wanted_re = preg_replace('/\r\n/',"\n", $wanted); > if (isset($section_text['EXPECTF'])) { > $wanted_re = preg_quote($wanted_re, '/'); > // Stick to basics > $wanted_re = str_replace('%e', '\\' . DIRECTORY_SEPARATOR, $wanted_re); > $wanted_re = str_replace('%s', '[^\r\n]+', $wanted_re); > $wanted_re = str_replace('%a', '.+', $wanted_re); > $wanted_re = str_replace('%w', '\s*', $wanted_re); > $wanted_re = str_replace('%i', '[+-]?\d+', $wanted_re); > $wanted_re = str_replace('%d', '\d+', $wanted_re); > $wanted_re = str_replace('%x', '[0-9a-fA-F]+', $wanted_re); > $wanted_re = str_replace('%f', > '[+-]?\.?\d+\.?\d*(?:[Ee][+-]?\d+)?', $wanted_re); > $wanted_re = str_replace('%c', '.', $wanted_re); > // %f allows two points "-.0.0" but that is the best *simple* expression > } > /* DEBUG YOUR REGEX HERE > var_dump($wanted_re); > print(str_repeat('=', 80) . "\n"); > var_dump($output); > */ > if (is_binary($output)) { > if (preg_match((binary)"/^$wanted_re\$/s", $output)) { > $passed = true; > } > } else { > if (preg_match("/^$wanted_re\$/s", $output)) { > $passed = true; > } > } > if ($passed) { > if (!$cfg['keep']['php']) { > @unlink($test_file); > } > if (isset($old_php)) { > $php = $old_php; > } > if (!$leaked && !$failed_headers) { > show_result("PASS", $tested, $tested_file, '', $temp_filenames); > return 'PASSED'; > } > } > } else { > $wanted = trim($section_text['EXPECT']); > if (is_binary($output)) { > $wanted = preg_replace(b'/\r\n/', b"\n", (binary)$wanted); > } else { > $wanted = preg_replace('/\r\n/', "\n", (binary)$wanted); > } > show_file_block('exp', $wanted); > // compare and leave on success > if (!strcmp($output, $wanted)) { > $passed = true; > if (!$cfg['keep']['php']) { > @unlink($test_file); > } > if (isset($old_php)) { > $php = $old_php; > } > if (!$leaked && !$failed_headers) { > show_result("PASS", $tested, $tested_file, '', $temp_filenames); > return 'PASSED'; > } > } > $wanted_re = null; > } > // Test failed so we need to report details. > if ($failed_headers) { > $passed = false; > $wanted = $wanted_headers . "\n--HEADERS--\n" . $wanted; > $output = $output_headers . "\n--HEADERS--\n" . $output; > if (isset($wanted_re)) { > $wanted_re = preg_quote($wanted_headers . > "\n--HEADERS--\n", '/') . $wanted_re; > } > } > if ($leaked) { > $restype[] = 'LEAK'; > } > if ($warn) { > $restype[] = 'WARN'; > } > if (!$passed) { > if (isset($section_text['XFAIL'])) { > $restype[] = 'XFAIL'; > } else { > $restype[] = 'FAIL'; > } > } > if (!$passed) { > // write .exp > if (strpos($log_format, 'E') !== false && > file_put_contents($exp_filename, $wanted) === false) { > error("Cannot create expected test output - $exp_filename"); > } > // write .out > if (strpos($log_format, 'O') !== false && > file_put_contents($output_filename, $output) === false) { > error("Cannot create test output - $output_filename"); > } > // write .diff > $diff = generate_diff($wanted, $wanted_re, $output); > show_file_block('diff', $diff); > if (strpos($log_format, 'D') !== false && > file_put_contents($diff_filename, $diff) === false) { > error("Cannot create test diff - $diff_filename"); > } > // write .log > if (is_binary($output)) { > $content = b" > ---- EXPECTED OUTPUT > $wanted > ---- ACTUAL OUTPUT > $output > ---- FAILED > "; > } else { > $content = " > ---- EXPECTED OUTPUT > $wanted > ---- ACTUAL OUTPUT > $output > ---- FAILED > "; > } > if (strpos($log_format, 'L') !== false && > file_put_contents($log_filename, $content) === false) { > error("Cannot create test log - $log_filename"); > error_report($file, $log_filename, $tested); > } > } > show_result(implode('&', $restype), $tested, $tested_file, $info, $temp_filenames); > foreach ($restype as $type) { > $PHP_FAILED_TESTS[$type.'ED'][] = array ( > 'name' => $file, > 'test_name' => > (is_array($IN_REDIRECT) ? $IN_REDIRECT['via'] : '') . $tested . " [$tested_file]", > 'output' => $output_filename, > 'diff' => $diff_filename, > 'info' => $info, > ); > } > if (isset($old_php)) { > $php = $old_php; > } > return $restype[0].'ED'; > } > function comp_line($l1, $l2, $is_reg) > { > if ($is_reg) { > if (is_binary($l2)) { > return preg_match((binary)"/^$l1\$/s", (binary)$l2); > } > return preg_match("/^$l1$/s", $l2); > } else { > if (is_binary($l2)) { > return !strcmp((binary)$l1, (binary)$l2); > } > return !strcmp($l1, $l2); > } > } > function count_array_diff($ar1, $ar2, $is_reg, $w, $idx1, $idx2, $cnt1, $cnt2, $steps) > { > $equal = 0; > while ($idx1 < $cnt1 && $idx2 < $cnt2 && comp_line($ar1[$idx1], $ar2[$idx2], $is_reg)) { > $idx1++; > $idx2++; > $equal++; > $steps--; > } > if (--$steps > 0) { > $eq1 = 0; > $st = $steps / 2; > for ($ofs1 = $idx1 + 1; $ofs1 < $cnt1 && $st-- > 0; $ofs1++) { > $eq = count_array_diff($ar1, $ar2, $is_reg, $w, $ofs1, $idx2, $cnt1, $cnt2, $st); > if ($eq > $eq1) { > $eq1 = $eq; > } > } > $eq2 = 0; > $st = $steps; > for ($ofs2 = $idx2 + 1; $ofs2 < $cnt2 && $st-- > 0; $ofs2++) { > $eq = count_array_diff($ar1, $ar2, $is_reg, $w, $idx1, $ofs2, $cnt1, $cnt2, $st); > if ($eq > $eq2) { > $eq2 = $eq; > } > } > if ($eq1 > $eq2) { > $equal += $eq1; > } else if ($eq2 > 0) { > $equal += $eq2; > } > } > return $equal; > } > function generate_array_diff($ar1, $ar2, $is_reg, $w) > { > $idx1 = 0; $ofs1 = 0; $cnt1 = count($ar1); > $idx2 = 0; $ofs2 = 0; $cnt2 = count($ar2); > $diff = array(); > $old1 = array(); > $old2 = array(); > while ($idx1 < $cnt1 && $idx2 < $cnt2) { > if (comp_line($ar1[$idx1], $ar2[$idx2], $is_reg)) { > $idx1++; > $idx2++; > continue; > } else { > $c1 = count_array_diff($ar1, $ar2, $is_reg, $w, $idx1+1, $idx2, $cnt1, $cnt2, 10); > $c2 = count_array_diff($ar1, $ar2, $is_reg, $w, $idx1, $idx2+1, $cnt1, $cnt2, 10); > if ($c1 > $c2) { > if (is_binary($w[$idx1])) { > $old1[$idx1] = > (binary)sprintf("%03d- ", $idx1+1) . $w[$idx1++]; > } else { > $old1[$idx1] = sprintf("%03d- ", $idx1+1) . $w[$idx1++]; > } > $last = 1; > } else if ($c2 > 0) { > if (is_binary($ar2[$idx2])) { > $old2[$idx2] = > (binary)sprintf("%03d+ ", $idx2+1) . $ar2[$idx2++]; > } else { > $old2[$idx2] = sprintf("%03d+ ", $idx2+1) . $ar2[$idx2++]; > } > $last = 2; > } else { > if (is_binary($ar2[$idx2])) { > $old1[$idx1] = > (binary)sprintf("%03d- ", $idx1+1) . $w[$idx1++]; > $old2[$idx2] = > (binary)sprintf("%03d+ ", $idx2+1) . $ar2[$idx2++]; > } else { > $old1[$idx1] = sprintf("%03d- ", $idx1+1) . $w[$idx1++]; > $old2[$idx2] = sprintf("%03d+ ", $idx2+1) . $ar2[$idx2++]; > } > } > } > } > > reset($old1); $k1 = key($old1); $l1 = -2; > reset($old2); $k2 = key($old2); $l2 = -2; > while ($k1 !== null || $k2 !== null) { > if ($k1 == $l1 + 1 || $k2 === null) { > $l1 = $k1; > $diff[] = current($old1); > $k1 = next($old1) ? key($old1) : null; > } else if ($k2 == $l2 + 1 || $k1 === null) { > $l2 = $k2; > $diff[] = current($old2); > $k2 = next($old2) ? key($old2) : null; > } else if ($k1 < $k2) { > $l1 = $k1; > $diff[] = current($old1); > $k1 = next($old1) ? key($old1) : null; > } else { > $l2 = $k2; > $diff[] = current($old2); > $k2 = next($old2) ? key($old2) : null; > } > } > while ($idx1 < $cnt1) { > $diff[] = sprintf("%03d- ", $idx1 + 1) . $w[$idx1++]; > } > while ($idx2 < $cnt2) { > $diff[] = sprintf("%03d+ ", $idx2 + 1) . $ar2[$idx2++]; > } > return $diff; > } > function generate_diff($wanted, $wanted_re, $output) > { > if (is_binary($output)) { > $w = explode(b"\n", $wanted); > $o = explode(b"\n", $output); > $r = is_null($wanted_re) ? $w : explode(b"\n", $wanted_re); > } else { > $w = explode("\n", $wanted); > $o = explode("\n", $output); > $r = is_null($wanted_re) ? $w : explode("\n", $wanted_re); > } > $diff = generate_array_diff($r, $o, !is_null($wanted_re), $w); > if (is_binary($output)) { > return implode(b"\r\n", $diff); > } > return implode("\r\n", $diff); > } > function error($message) > { > echo "ERROR: {$message}\n"; > exit(1); > } > function settings2array($settings, &$ini_settings) > { > foreach($settings as $setting) { > if (strpos($setting, '=') !== false) { > $setting = explode("=", $setting, 2); > $name = trim(strtolower($setting[0])); > $value = trim($setting[1]); > if ($name == 'extension') { > if (!isset($ini_settings[$name])) { > $ini_settings[$name] = array(); > } > $ini_settings[$name][] = $value; > } else { > $ini_settings[$name] = $value; > } > } > } > } > function settings2params(&$ini_settings) > { > $settings = ''; > foreach($ini_settings as $name => $value) { > if (is_array($value)) { > foreach($value as $val) { > $val = addslashes($val); > $settings .= " -d \"$name=$val\""; > } > } else { > $value = addslashes($value); > $settings .= " -d \"$name=$value\""; > } > } > $ini_settings = $settings; > } > function compute_summary() > { > global $n_total, $test_results, $ignored_by_ext, $sum_results, $percent_results; > $n_total = count($test_results); > $n_total += $ignored_by_ext; > $sum_results = array('PASSED' => 0, 'WARNED' => 0, 'SKIPPED' => > 0, 'FAILED' => 0, 'BORKED' => 0, 'LEAKED' => 0, 'XFAILED' => 0); > foreach ($test_results as $v) { > $sum_results[$v]++; > } > $sum_results['SKIPPED'] += $ignored_by_ext; > $percent_results = array(); > while (list($v, $n) = each($sum_results)) { > $percent_results[$v] = (100.0 * $n) / $n_total; > } > } > function get_summary($show_ext_summary, $show_html) > { > global $exts_skipped, $exts_tested, $n_total, $sum_results, > $percent_results, $end_time, $start_time, $failed_test_summary, $PHP_FAILED_TESTS, $leak_check; > $x_total = $n_total - $sum_results['SKIPPED'] - $sum_results['BORKED']; > if ($x_total) { > $x_warned = (100.0 * $sum_results['WARNED']) / $x_total; > $x_failed = (100.0 * $sum_results['FAILED']) / $x_total; > $x_xfailed = (100.0 * $sum_results['XFAILED']) / $x_total; > $x_leaked = (100.0 * $sum_results['LEAKED']) / $x_total; > $x_passed = (100.0 * $sum_results['PASSED']) / $x_total; > } else { > $x_warned = $x_failed = $x_passed = $x_leaked = $x_xfailed = 0; > } > $summary = ""; > if ($show_html) { > $summary .= "
\n";
>         }

>         if ($show_ext_summary) {
>                 $summary .= "
> =====================================================================
> TEST RESULT SUMMARY
> ---------------------------------------------------------------------
> Exts skipped    : " . sprintf("%4d", $exts_skipped) . "
> Exts tested     : " . sprintf("%4d", $exts_tested) . "
> ---------------------------------------------------------------------
> ";
>         }

>         $summary .= "
> Number of tests : " . sprintf("%4d", $n_total). "          " . sprintf("%8d", $x_total);

>         if ($sum_results['BORKED']) {
>                 $summary .= "
> Tests borked    : " . sprintf("%4d (%5.1f%%)", $sum_results['BORKED'],
> $percent_results['BORKED']) . " --------";
>         }

>         $summary .= "
> Tests skipped   : " . sprintf("%4d (%5.1f%%)", $sum_results['SKIPPED'],
> $percent_results['SKIPPED']) . " --------
> Tests warned    : " . sprintf("%4d (%5.1f%%)", $sum_results['WARNED'],
> $percent_results['WARNED']) . " " . sprintf("(%5.1f%%)", $x_warned) . "
> Tests failed    : " . sprintf("%4d (%5.1f%%)", $sum_results['FAILED'],
> $percent_results['FAILED']) . " " . sprintf("(%5.1f%%)", $x_failed) . "
> Expected fail   : " . sprintf("%4d (%5.1f%%)", $sum_results['XFAILED'],
> $percent_results['XFAILED']) . " " . sprintf("(%5.1f%%)", $x_xfailed);

>         if ($leak_check) {
>                 $summary .= "
> Tests leaked    : " . sprintf("%4d (%5.1f%%)", $sum_results['LEAKED'],
> $percent_results['LEAKED']) . " " . sprintf("(%5.1f%%)", $x_leaked);
>         }

>         $summary .= "
> Tests passed    : " . sprintf("%4d (%5.1f%%)", $sum_results['PASSED'],
> $percent_results['PASSED']) . " " . sprintf("(%5.1f%%)", $x_passed) . "
> ---------------------------------------------------------------------
> Time taken      : " . sprintf("%4d seconds", $end_time - $start_time) . "
> =====================================================================
> ";
>         $failed_test_summary = '';

>         if (count($PHP_FAILED_TESTS['BORKED'])) {
>                 $failed_test_summary .= "
> =====================================================================
> BORKED TEST SUMMARY
> ---------------------------------------------------------------------
> ";
>                 foreach ($PHP_FAILED_TESTS['BORKED'] as $test_data) {
>                         $failed_test_summary .= $test_data['info'] . "\n";
>                 }

>                 $failed_test_summary .= 
> "=====================================================================\n";
>         }

>         if (count($PHP_FAILED_TESTS['FAILED'])) {
>                 $failed_test_summary .= "
> =====================================================================
> FAILED TEST SUMMARY
> ---------------------------------------------------------------------
> ";
>                 foreach ($PHP_FAILED_TESTS['FAILED'] as $test_data) {
>                         $failed_test_summary .= $test_data['test_name'] . $test_data['info'] . "\n";
>                 }

>                 $failed_test_summary .= 
> "=====================================================================\n";
>         }

>         if (count($PHP_FAILED_TESTS['XFAILED'])) {
>                 $failed_test_summary .= "
> =====================================================================
> EXPECTED FAILED TEST SUMMARY
> ---------------------------------------------------------------------
> ";
>                 foreach ($PHP_FAILED_TESTS['XFAILED'] as $test_data) {
>                         $failed_test_summary .= $test_data['test_name'] . $test_data['info'] . "\n";
>                 }

>                 $failed_test_summary .= 
> "=====================================================================\n";
>         }

>         if (count($PHP_FAILED_TESTS['LEAKED'])) {
>                 $failed_test_summary .= "
> =====================================================================
> LEAKED TEST SUMMARY
> ---------------------------------------------------------------------
> ";
>                 foreach ($PHP_FAILED_TESTS['LEAKED'] as $test_data) {
>                         $failed_test_summary .= $test_data['test_name'] . $test_data['info'] . "\n";
>                 }

>                 $failed_test_summary .= 
> "=====================================================================\n";
>         }

>         if ($failed_test_summary && !getenv('NO_PHPTEST_SUMMARY')) {
>                 $summary .= $failed_test_summary;
>         }

>         if ($show_html) {
>                 $summary .= "
"; > } > return $summary; > } > function show_start($start_time) > { > global $html_output, $html_file; > if ($html_output) { > fwrite($html_file, "

Time Start: " . @date('Y-m-d H:i:s', $start_time) . "

\n"); > fwrite($html_file, "\n"); > } > echo "TIME START " . @date('Y-m-d H:i:s', $start_time) . > "\n=====================================================================\n"; > } > function show_end($end_time) > { > global $html_output, $html_file; > if ($html_output) { > fwrite($html_file, "
\n"); > fwrite($html_file, "

Time End: " . @date('Y-m-d H:i:s', $end_time) . "

\n"); > } > echo > "=====================================================================\nTIME > END " . @date('Y-m-d H:i:s', $end_time) . "\n"; > } > function show_summary() > { > global $html_output, $html_file; > if ($html_output) { > fwrite($html_file, "
\n" . get_summary(true, true)); > } > echo get_summary(true, false); > } > function show_redirect_start($tests, $tested, $tested_file) > { > global $html_output, $html_file; > if ($html_output) { > fwrite($html_file, "---> $tests > ($tested [$tested_file]) begin\n"); > } > echo "---> $tests ($tested [$tested_file]) begin\n"; > } > function show_redirect_ends($tests, $tested, $tested_file) > { > global $html_output, $html_file; > if ($html_output) { > fwrite($html_file, "---> $tests > ($tested [$tested_file]) done\n"); > } > echo "---> $tests ($tested [$tested_file]) done\n"; > } > function show_test($test_idx, $shortname) > { > global $test_cnt; > echo "TEST $test_idx/$test_cnt [$shortname]\r"; > `flush()`; > } > function show_result($result, $tested, $tested_file, $extra = '', $temp_filenames = null) > { > global $html_output, $html_file, $temp_target, $temp_urlbase; > echo "$result $tested [$tested_file] $extra\n"; > if ($html_output) { > if (isset($temp_filenames['file']) && > @file_exists($temp_filenames['file'])) { > $url = str_replace($temp_target, $temp_urlbase, $temp_filenames['file']); > $tested = "$tested"; > } > if (isset($temp_filenames['skip']) && > @file_exists($temp_filenames['skip'])) { > if (empty($extra)) { > $extra = "skipif"; > } > $url = str_replace($temp_target, $temp_urlbase, $temp_filenames['skip']); > $extra = "$extra"; > } else if (empty($extra)) { > $extra = " "; > } > if (isset($temp_filenames['diff']) && > @file_exists($temp_filenames['diff'])) { > $url = str_replace($temp_target, $temp_urlbase, $temp_filenames['diff']); > $diff = "diff"; > } else { > $diff = " "; > } > if (isset($temp_filenames['mem']) && > @file_exists($temp_filenames['mem'])) { > $url = str_replace($temp_target, $temp_urlbase, $temp_filenames['mem']); > $mem = "leaks"; > } else { > $mem = " "; > } > fwrite($html_file, > "" . > "$result" . > "$tested" . > "$extra" . > "$diff" . > "$mem" . > "\n"); > } > } > /* > * Local variables: > * tab-width: 4 > * c-basic-offset: 4 > * End: > * vim: noet sw=4 ts=4 > */ ?>> Best regards, Marcus